Lumenier have released a frame in collaboration with the world famous Lumenier pilot, CHARPU.
This is the QAV-X CHARPU frame which is a 'X' frame made out of carbon fibre for durability. This quadcopter is lightweight, strong and finely tuned for high performance. Finest quality of carbon fiber there, the QAV-X CHARPU has been stripped down to the bare essentials of FPV without sacrificing anything important. No need to 3D print your own custom mount to angle your camera up, there is already one pre-made in the box. All you need to do is make sure your camera is securely attached to the FPV Frame and you're off.
The main FPV Body is a 3mm plate is CNC milled out of a solid sheet of premium Lumenier carbon fiber. The outer weave of Carbon fiber runs 100% down each arm of the QAC-X(0/90 weave). allowing the frame maximum strength of carbon and arms. The top plate of the Carbon fiber frame included an accessory antenna extension plate, allowing for multiple cable ties to lock down your FPV Antenna. Another great feature is you can no longer damage the SMA connection on your Video Transmitter, the top plate has been specially desinged so you can reach the VTX button and LED display for easy channel adjustment. The balancing bumps on the sides of the top plate make it more simple to measure the center of gravity on your frame, this allows you to get the percvect balance while flying the aircraft.
Each kit will include a carbon fiber battery protector plate. The QAV-X CHAPRU is designed to strap a Li-Po battery to the bottom of the frame which exposes the battery during a hard landing or crash, this is what the carbon fiber battery protector plate is for, it takes the punch for the battery or alternatively you can use some Neoprene foam to create a landing pad for the battery.
This FPV Frames comes with high quality aluminium hardware, all the screws are premium, black oxide steel. The spacers have a textured grip and are also 28mm rather than the standard 35mm, this allows to FPV Frame to have a sleek, low profile look.
- Full 3K Carbon Fiber airframe featuring a solid 3mm main plate.
- Dual purpose FPV and HD camera mounting solution.
- Compact size for 5" propellers, 214mm motor to motor.
- Black Oxide steel screws
- Easy grip black anodized spacers
- Multiple motor mounting holes to fit a variety of motors (M3 and M2 screw mounting patterns).
- "Bumpers" on the end of the arms to protect the motor during a crash, just like the QAV250.
- Included Lumenier 4Power power distribution board and XT-60 Pig-Tail to power ESCs and FPV flight electronics. The PDB can optionally be outfitted with a Pololu 12v or 5v voltage step-down (Pololu board not included).
- LiPo battery protection plate included.
- Designed around popular 26mm sized cams in cases such as the Lumenier CM-650 or HS1177.
- Support to carry HD camera at 35 degree angle(such as the GoPro 4, Xiaomi Yi, etc).
- Lightweight and rigid
In the Box:
- 1x QAV-X CHARPU Carbon Fiber air frame kit (3mm)
- 3mm carbon fiber unibody main plate
- 2mm carbon fiber top plate
- 1.5mm carbon fiber antenna plate
- 2x 1.5mm carbon fiber camera sidewall plates
- 1x 1.5mm HD camera mounting plate
- 1x 1.5mm Battery protector plate
- 1x Set of black steel screws and aluminum hardware including knurled spacers
- 1x Lumenier 4Power Power distribution board + 3mm spacer / screw set
- 1x set 6mm black polyamide spacers / screws for flight controller
- 1x XT-60 Pig-Tail
- 2x Neoprene foam tape
- 1x Lumenier small lipo strap
Customer Service & Care
There are multiple reasons you should purchase from us so let's start with our customer service, for this, we can refer to our trust pilot review page. You'll see many reviews about our company all but a few that are praising us for our customer service. All orders shipped out the same day, so you get it as soon as possible. Also, our after sales care is second to none, we do keep in contact with our customers to see how they are getting on with the new item they have purchased. Don't forget to mention we do repairs and servicing, so at all costs, we try to keep the customer happy with the services we provide. If you would like to look at our trust pilot reviews to see how other people found their experience purchasing from us go to Trustpilot/RCLegends
You can visit our showroom and have a chat with us and maybe walk away with your purchase when you're here, we will inform you on all the best new gear coming out if you don't have the time to keep up to date with the drone community. We will never try and force you into buying anything, we always try to give the best advice whether that's on the phone or in person.
We pride ourselves on giving great customer service, therefore we decided to get feedback on our services. We have now accumulated over 100+ Great reviews that new users can see. We love to know our customers are happy with what they've purchased and we can always give tips on anything you ask.
From Amazon to eBay, we use multiple 3rd party channels for retailing products. We have fulfilled orders from all over Europe and customers have given positive feedback. We have a 4.5-star rating, as well as 99% positive feedback. One of the biggest Drone sellers on Amazon with little negative feedback
Our eBay channel is where we started. We now have one of the highest feedback scores for any Drone retailer. We ship to all over Europe and have sold over 2,000 items alone on eBay. We respond to any queries you have within 24hrs and we are always on time with shipping.