All Categories

Place your promotion here

You have no items in your shopping cart.

You have no items to compare.

HK KK2.1HC Multi-Rotor Hard Case Flight Control Board With Remote Programmer

HK KK2.1HC Multi-Rotor Hard Case Flight Control Board With Remote Programmer

£34.99

Availability: Out of stock

SKU: HK KK2.1HC

The next evolution of the rotor revolution is here!! The KK2.1HC (Hard Case) is packing new found power with updated sensors, memory, header pins, hard case and remote programmer.



Description

Details

The KK2.1HC is the next big evolution of the first generation KK flight control boards. The KK2.1HC was engineered from the ground up to bring multi-rotor flight to everyone, not just the experts. The remote LCD screen and built in software makes installing and setup easier than ever. The screen and programing buttons have been relocated to a remote plug-in programmer and a hard case installed, this makes the KK extremely durable. The plug in programmer uses the exact same format as the onboard version and can be plugged in at anytime for a quick value change. This new design allows the KK to be installed in frames where access to the onboard buttons and screen was an issue, you can even leave the cable plugged into the KK side and run it out for access to the programmer. The Hard case still retains the standardized 45mm mounting holes and has the buzzer is now internally mounted. Mounting locations and damage to the LCD screen is a thing of the past.

A host of multi-rotor craft types are pre-installed, simply select your craft type, check motor layout/propeller direction, calibrate your ESCs and radio and you’re ready to go! All of which is done with easy to follow on screen prompts!

The original KK gyro system has been updated to an incredibly sensitive 6050 MPU system, making this the most stable KK board ever and allowing for the addition of an auto-level function. At the heart of the KK2.1HC is an Atmel Mega644PA 8-bit AVR RISC-based microcontroller with 64k of memory. An additional polarity protected header has been added for voltage detection, so no need for on-board soldering. A handy piezo buzzer is also included for audio warning when activating and deactivating the board.

The KK2.1HC added polarity protection to the voltage sense header and on-board buzzer. The voltage sense line has been updated for better accuracy. The Hard case is clearly labeled, making installation and connections a snap.

If you’re new to multi-rotor flight or have been unsure about how to setup a KK board then the KK2.1HC was built for you. The 6 Pin USBasp AVR programming interface ensures future software updates will be quick and easy.

Specs:
Size: 55mm x 55mm x 19mm
Weight: 32g
IC: Atmega644 PA
Gyro/Acc: 6050MPU InvenSense Inc.
Auto-level: Yes
Input Voltage: 4.8-6.0V
AVR interface: standard 6 pin.
Signal from Receiver: 1520us (5 channels)
Signal to ESC: 1520us

Firmware Version: 1.6:
Pre-installed firmware.
Dualcopter
Tricopter
Y6
Quadcopter +
Quadcopter X
Hexcopter +
Hexcopter X
Octocopter +
Octocopter X
X8 +
X8 X
H8
H6
V8
V6
Aero 1S Aileron
Aero 2S Aileron
Flying Wing
Singlecopter 2M 2S
Singlecopter 1M 4S

(Custom Mix via the "Mixer Editor" option)

The Mixer Editor allows you to adjust where and how much signal the motors receive from stick input and sensors. This allows you to create any configuration possible with up to 8 motors or servos.

Technical Specification

Additional Information

Technical Specification No

Why Choose Us?

Customer Service & Care

There are multiple reasons you should purchase from us so let's start with our customer service, for this, we can refer to our trust pilot review page. You'll see many reviews about our company all but a few that are praising us for our customer service. All orders shipped out the same day, so you get it as soon as possible. Also, our after sales care is second to none, we do keep in contact with our customers to see how they are getting on with the new item they have purchased. Don't forget to mention we do repairs and servicing, so at all costs, we try to keep the customer happy with the services we provide. If you would like to look at our trust pilot reviews to see how other people found their experience purchasing from us go to Trustpilot/RCLegends

Still Unsure?

You can visit our showroom and have a chat with us and maybe walk away with your purchase when you're here, we will inform you on all the best new gear coming out if you don't have the time to keep up to date with the drone community. We will never try and force you into buying anything, we always try to give the best advice whether that's on the phone or in person.

We pride ourselves on giving great customer service, therefore we decided to get feedback on our services. We have now accumulated over 100+ Great reviews that new users can see. We love to know our customers are happy with what they've purchased and we can always give tips on anything you ask.

From Amazon to eBay, we use multiple 3rd party channels for retailing products. We have fulfilled orders from all over Europe and customers have given positive feedback. We have a 4.5-star rating, as well as 99% positive feedback. One of the biggest Drone sellers on Amazon with little negative feedback

Our eBay channel is where we started. We now have one of the highest feedback scores for any Drone retailer. We ship to all over Europe and have sold over 2,000 items alone on eBay. We respond to any queries you have within 24hrs and we are always on time with shipping.

























Video

No Video Available